no access to data-partition

[DerRic]

hello out there,

i have a problem with my 500GB MssII. due to a loss of power the data partition of the mss got a failure. after powering up now the upper led is blinking yello 4 times and then one time green. i disassembled the mss and connected the hdd directly to a pc. with testdisk i got the message that there was a bad sector, which was directly the sector the data partition starts. with the seatools i was able to fix the bad sector and copy the data from the drive.
the problem is, that after reassembling the mss and powering up, i see the right users, can access the webinterface, but there is no data in the user's dirs.
i think there is still a problem with the repaired partition, so the users get no access to data. has anyone the same problem or can help?

Greetings, derric

[DerRic]

i found the solution for the problem. i disassembled the hdd and put again it in a single frame. with the help of a knoppix live disc i was able to fix the partition. it took a while and the partition-tool corrected the bad file system. after rebooting the mss works fine. no loss of data so far.

Greetings